HL-ART-1220 SERIES

Specification-Grade, Direct-View LED System for Architectural and artistic applications

12mm x 20mm / 0.47” x 0.79” (W x H), horizontal bending, customizable linear luminaires with versatile LED selection

KEY FEATURES

Monochromatic, dynamic white and color-changing (RGBW or RGB) LED options
Electronics are encapsulated with a high-quality Dow silicone, using an advanced co-extrusion technology
Constant current integrated circuit design ensures uniform light along the entire length of luminaire
Cut lengths and terminations are done at GVA factory to ensure IP rating, reliability and to maintain a sleek luminaire form factor by avoiding bulky DIY end caps

Products

LUMEN OUTPUT/FT (HIGH OUTPUT): 150lm/ft
ENVIRONMENT: Dry, Damp or Wet Locations, 0-100% humidity
LED COLORS: MONO (13 colors)
SIZE (WxH): 12mm x 20mm / 0.47” x 0.79” (W x H)
INPUT VOLTAGE : 24VDC (23.5Vmin, 24.5Vmax)
LENGTH (LOW POWER): Minimum length of 100mm, increments of 50mm up to 18,000mm
BEND: Maximum horizontal bend radius of 240mm / 9.45” with applicable profile selection

HL-ART-1220-DWT

LUMEN OUTPUT/FT : 159lm/ft
ENVIRONMENT: Dry, Damp or Wet Locations, 0-100% humidity
LED COLORS: DWT
SIZE: 12mm x 20mm / 0.47” x 0.79” (W x H)
INPUT VOLTAGE : 24VDC (23.5Vmin, 24.5Vmax)
LENGTH (LOW POWER): Minimum length of 100mm, increments of 50mm up to 5,000mm
BEND: Maximum horizontal bend radius of 240mm / 9.45” with applicable profile selection

HL-ART-1220-RGBW

LUMEN OUTPUT/FT : 74lm/ft
ENVIRONMENT: Dry, Damp or Wet Locations, 0-100% humidity
LED COLORS: RGBW
SIZE: 12mm x 20mm / 0.47” x 0.79” (W x H)
INPUT VOLTAGE : 24VDC (23.5Vmin, 24.5Vmax)
LENGTH (LOW POWER): Minimum length of 250mm, increments of 125mm up to 5,000mm
BEND: Maximum horizontal bend radius of 240mm / 9.45” with applicable profile selection

HL-ART-1220-RGB

LUMEN OUTPUT/FT : 61lm/ft
ENVIRONMENT: Dry, Damp or Wet Locations, 0-100% humidity
LED COLORS: RGB
SIZE: 12mm x 20mm / 0.47” x 0.79” (W x H)
INPUT VOLTAGE : 24VDC (23.5Vmin, 24.5Vmax)
LENGTH (LOW POWER): Minimum length of 125mm, increments of 62.5mm up to 8,000mm
BEND: Maximum horizontal bend radius of 240mm / 9.45” with applicable profile selection